A flat stack of peel and stick wallpaper sheets printed with pink and white peonies on a dark green background, lying at an angle on a pale gray surface
MS Creations

Craft Paper Storage: How to Keep Peel and Stick Sheets Flat

Main Street9 MIN READ

Paper keeps a record of how it was treated. Lean a pack against the side of a bookcase for a winter and it comes back bowed. Leave it on a sunny windowsill and one edge comes back paler than the rest. Good craft paper storage is mostly a matter of not giving the paper anything to remember: keep it flat, dry, dark and easy to find, and a sheet you bought in spring behaves like a new one in autumn.

This guide is written for peel and stick sheets and craft paper in particular, because the standard advice assumes a 12 x 12 scrapbook page. Adhesive sheets are a different shape with a different build.

What a stored sheet is up against

A peel and stick sheet is three layers: a printed paper face, a layer of adhesive, and a backing liner that protects the adhesive until you are ready. Our explainer on how peel and stick wallpaper works covers the anatomy. In storage, each layer has its own weakness.

  • Curl. Paper takes the shape it rests in. A sheet that leans, slumps or sits rolled for months picks up a curve, and a curved sheet fights you at the exact moment you need it to lie still.
  • Creases. A soft bow can relax. A hard fold in a printed face usually stays visible as a line, even after the sheet is smoothed onto a surface.
  • Moisture. Paper absorbs humidity from the air and releases it again. Repeated swings make sheets wave at the edges, and damp storage invites mildew.
  • Light. Printed color and long hours of direct sun are a poor match. A pack left near a window can fade unevenly, top sheet first.
  • Dust. The liner protects the adhesive only while it stays on. A corner peeled back "just to check" collects lint that never comes off.

Craft paper storage starts with the size of the sheet

Most paper craft storage is built around two formats: letter size (8.5 x 11 inches) and the 12 x 12 scrapbook page. Peel and stick sheets match neither, which is why they end up propped behind a door. Main Street's formats, as listed on the product pages, are:

  • Classic wallpaper sheets: 11 x 16 inches.
  • Chalkboard Classic and Dry Erase Classic craft paper: 11 x 15 inches.
  • Embossed craft paper such as Glow Getter: 10 x 15 inches. Sizes vary within this group, and one design is listed at 17.25 x 10 inches, so check the page for the one you own.

The useful coincidence is tabloid paper, also sold as ledger size, which measures 11 x 17 inches. Boxes, folders and portfolios made for that format hold an 11 x 16 sheet flat with an inch of length to spare, and the two smaller formats sit inside it comfortably. The 17.25 inch design is a quarter inch longer than a tabloid page, so measure the inside of the container before you count on it.

A 12 x 12 scrapbook case is the wrong home for a full sheet. An 11 x 16 sheet overhangs it by four inches, and the overhang is where the curl starts. Keep those cases for offcuts.

Flat or upright? How to keep sheets from curling

Paper crafters have argued this one for years. Flat stacks cannot slump, but the bottom sheets carry the weight above them. Upright files are easier to flip through, but a sheet with room to lean will bow. For adhesive sheets we would settle it this way:

  • Flat is the default. These are sold as flat sheets, not rolls, and flat is the shape you want them in on application day. Keep stacks modest, a few packs high, and put nothing heavy on top.
  • Upright works only when the sheet is fully supported. A rigid portfolio or a file box packed snugly, with stiff dividers taller than the paper, holds sheets as flat as a drawer does. A half-empty box does not.
  • Rolling is a last resort. A roll builds a curve into all three layers at once, and a tight roll can coax the liner away from the face along the edges. If you have to roll a sheet to carry it, roll it loosely with the print facing out and lay it flat again the same day.
  • Go easy on embossed designs. The embossed craft papers have a raised surface. We would give them the top of the stack, where nothing presses on the pattern.

Where to keep the stash: cool, dry and dark

Paper conservators give the same advice for anything worth keeping: a dark, cool, fairly dry place where conditions hold steady, and a firm no to attics, basements and bathrooms. Makers of adhesive label stock add two points that carry over to sheets. Store the material at ordinary room temperature and middling humidity, and leave it in its original packaging until you need it.

  • Good: a bedroom closet shelf, a dresser or desk drawer, a lidded box under the bed, a cabinet in a room you heat and cool.
  • Poor: the garage, the attic, a basement shelf, the cupboard over the fridge, anywhere beside a radiator or a sunny window.

Main Street does not publish a shelf life for its sheets, and we are not going to invent one. If a pack has been stored for a long while, test one sheet on a small project before you plan a whole wall around it.

Craft paper storage ideas that fit 11 x 16 sheets

No dedicated craft room required: one container that is big enough, rigid enough and closed will do.

A tabloid document box

A lidded box sized for 11 x 17 paper is the simplest answer. Lay packs flat inside, in the packaging they arrived in, with the label facing up. If the box is plain cardboard, it is also a good first project: our guide to covering a cardboard box, lid included walks through the corners, and a calm print such as Eucalyptus or Herringbone turns storage into something you can leave on an open shelf.

A shallow drawer

Any drawer with an interior of at least 11 x 16 inches works as a flat file. Shallow is better than deep, because a shallow drawer limits how high the stack can grow. Slip a sheet of stiff card between prints so you can lift out one design without disturbing the rest.

A rigid art portfolio

For small apartments, a hard-sided portfolio stores sheets upright in the gap behind a desk or beside a wardrobe. Choose stiff boards over a soft zip case, and keep it full enough that the paper cannot lean. Add tabbed dividers and it becomes a craft paper organizer you can flip through like a record crate.

What to skip

Letter trays are too short. Most magazine files are built for letter-size paper, so a 16 inch sheet stands proud of the top and bends over it. Soft tote bags give no support, and clips leave dents in the print.

Organize craft paper so you can find one sheet

Storage keeps paper in good shape, and organization gets it used. Sort in this order and the system stays simple as the stash grows.

  1. By size first. Mixed sizes in one stack let the larger sheets sag over the smaller ones.
  2. Then by print or color family. Florals together, stripes and geometrics together, wood and stone looks together. Founder Jan McCallum trained as an oil painter, and color is what these prints lead with, so color is usually how you will go looking.
  3. Keep each purchase together. The product pages note that slight color variations can occur in printing and recommend buying everything for one project at once. The storage version of that advice: do not shuffle two separate orders of the same print into one pile. Write the purchase month on the pack.
  4. Give offcuts their own home. Sort leftovers into half sheets, long strips and small pieces. Strips two inches wide and up are worth keeping for borders cut from sheets, and the rest feed the small projects in our craft wallpaper guide. Throw away anything with a peeled liner or a hard crease.
  5. Label the outside. A strip of Chalkboard Classic on the end of each box makes a label you can rewrite when the contents change; its product page lists bin labels among its uses. A piece of Dry Erase Classic inside the lid works as a running inventory.

Taking paper out of storage

A stored sheet needs a short runway. The insert packed with Main Street sheets says to let the paper acclimate in the room for eight hours before applying it, and that matters most for paper coming out of a cool closet into a warm room. Lay the sheets flat on a table, still on their liners, and leave them alone.

If a sheet has picked up a gentle bow, lay it face up on a clean, flat surface, cover it with plain paper and rest a large book or a board on top for a day or two. Skip the iron and the hair dryer: heat and adhesive are a combination to avoid before the sheet is on its surface. Then apply as usual, with a utility knife, a smoothing tool and a surface that is smooth, clean and dry.

Frequently asked questions

What is the best way to store craft paper?

Flat, in a closed container, in a room you live in. For adhesive sheets that means a lidded box or shallow drawer large enough for the whole sheet, kept away from sunlight, heat sources and damp. Leave each pack in its original packaging, keep the backing liner on, and sort by size first so larger sheets never sag over smaller ones.

Should craft paper be stored flat or upright?

Either can work, but flat is safer for peel and stick sheets. Upright storage is fine when the paper is fully supported, for example in a rigid portfolio or a snugly packed file box with stiff dividers. Problems start when a sheet has room to lean, because paper slowly takes the shape it rests in.

Will 12x12 craft paper storage fit peel and stick sheets?

Not full sheets. A 12 x 12 case is made for scrapbook paper, and an 11 x 16 inch wallpaper sheet overhangs it by four inches. Look for containers sold for tabloid or ledger paper, which is 11 x 17 inches. Keep a 12 x 12 case for offcuts, where its size suits half sheets and strips.

How long can you keep peel and stick paper before using it?

Main Street does not publish a shelf life, so we cannot give you a number. Adhesives generally age faster in heat and in humidity that swings up and down, which is why a closet beats a garage. If sheets have been stored for a long time, apply one to a small project first and see how it handles.

MAIN STREET

Featured in this article

Shop the wallpapers mentioned above.

Learn & Inspire

Wooden dollhouse with its interior walls lined in a white and grey line-drawn floral paper, furnished with small wooden furniture
Posted By Main Street

Crafts to Do With Scrapbook Paper: Seven Projects That Use It Up

A lot of scrapbook paper never makes it into a scrapbook. It sits in a pad or a drawer, too pretty to cut and too plentiful to use up, until you find the right project for it. This guide is a list of crafts to do with scrapbook paper that actually use the stuff: boxes, rosettes, a tiny papered room, a quilt you can hang. Along the way it covers where loose patterned paper is the right material and where a peel-and-stick sheet will save you a sticky afternoon. Scrapbook paper or peel-and-stick paper: which one does the project want? Scrapbook paper is usually sold as 12 x 12 inch sheets, with 8.5 x 11 and 6 x 6 pads on the side. Patterned scrapbook paper tends to be lighter than cardstock, printed on one or both sides, and it has no adhesive of its own. That makes it ideal for anything that folds, rolls or moves: boxes, fans, beads, pinwheels. A peel-and-stick sheet is a different animal. Main Street's Block Print Floral sheets, for example, are 11 x 16 inch peel and stick paper wallpaper with a self-adhesive back, sold in 12-packs. You do not fold a sheet like that into an origami box, because the adhesive side will grab itself. Where it shines is covering a flat surface in one smooth piece: a clipboard, a box lid, the back wall of a dollhouse room. A simple test before you start any project: Will the paper bend, fold or roll? Reach for scrapbook paper. Will the paper lie flat over something rigid? A peel-and-stick sheet is usually faster and flatter than glue. Both? Build the folded parts from scrapbook paper and cover the flat panels with an adhesive sheet. Crafts to do with scrapbook paper: seven projects worth the paper You need a craft knife, a metal ruler, a cutting mat and a bone folder (the back of a butter knife works in a pinch). If you want the cutting and scoring techniques in more depth, our guide to paper crafts for adults walks through each one. 1. Wallpaper a dollhouse or a shadow-box room This is the project scrapbook paper was born for. A small-scale print reads as full-size wallpaper once it is inside a room the size of a shoebox. Measure each wall, cut a paper template from plain printer paper first, and trace it onto the pattern so the windows and doorways land where they should. A fine, delicate print works best; a big bold floral at that scale looks like one giant flower. For back walls you can reach easily, a peel-and-stick sheet goes on without glue and stays flat. 2. Folded masu boxes for small things A masu box folds from a single square with no cutting and no glue. Start from a full 12 x 12 inch sheet and you get a box roughly 4 inches across and 2 inches deep, sized for jewelry, paper clips or seed packets. For the lid, fold a second square trimmed about a quarter inch larger. Patterned paper earns its keep here because the print shows on the outside of the box and the base, so pick a double-sided sheet if you have one. 3. Accordion rosettes Cut three strips about 2 inches wide across a 12-inch sheet, fan-fold each one in half-inch pleats, then join the strips end to end into a ring. Press the ring flat into a disc and hold it with a paper circle glued to the back. A small circle of contrasting paper covers the center. They look best in groups, so make a second one from 1.5-inch strips and a third from 3-inch strips. 4. Pinwheels on a dowel Cut a 6-inch square, slice from each corner toward the center (stop about an inch short), then bring every other point into the middle and pin it through a bead into a wooden dowel. Two-sided paper matters most for this one, since both faces show when the pinwheel spins. 5. Rolled paper beads Cut long, skinny triangles (about an inch wide at the base, tapering to a point over 11 inches), roll each one tightly around a skewer starting from the wide end, and glue down the tip. The taper gives you a fat, oval bead with the print spiraling around it. String them into a garland or a bookmark tassel, and seal them with a clear decoupage medium if you want a glossier finish. 6. A paper quilt wall hanging Borrow the geometry of a patchwork quilt. Cut a stack of 3-inch squares, slice some on the diagonal into triangles, and lay out a nine-patch or pinwheel block on a sturdy board. Mix two or three prints with a solid so the pattern has somewhere to rest. Glue each piece down with a glue stick, working from the center out, and hang the board on a ribbon. 7. Labeled pantry or craft-room boxes Combine the masu boxes from project two with labels you can rewrite. A strip of Chalkboard Classic craft paper (an 11 x 15 inch sheet you write on with chalk or chalk markers) cut into small tags gives each box a name you can change when the contents change. Where a peel-and-stick sheet does the job better Glue and thin paper do not always get along. Liquid glue soaks into lightweight patterned paper and makes it ripple as it dries, and a big panel is hard to smooth before the glue grabs. That is where an adhesive-backed sheet earns its place in the craft drawer. Clipboards and binder covers. A standard letter-size clipboard is about 9 x 12.5 inches, so one 11 x 16 inch sheet covers the face with a little to spare for trimming. A crisp geometric like Indigo Diamonds makes a plain board look store-bought. Box lids and tray bottoms. Large flat panels go on in one piece, with no glue lines showing through the print. Dollhouse floors and back walls. Easy to reach and perfectly flat. Line up one edge first, then smooth the sheet across from that edge so the pattern runs straight. Lining drawers with scrapbook paper is a popular idea too, and it has its own quirks (loose paper slides, glued paper is hard to get out). We covered it in detail in wrapping paper as drawer liner, which applies just as well to a stack of 12 x 12 sheets. Decorative craft paper: matching the print to the size of the project The single biggest reason a patterned paper project looks off is scale. A print that looks lovely on a full sheet can turn into an unreadable smudge on a 1-inch bead, or a lonely half-motif on a 3-inch quilt square. Tiny projects (beads, dollhouse walls, rosette centers): choose small, dense prints and tight stripes. A fine stripe such as Woven Stripe keeps its character even when cut down small. Medium projects (masu boxes, pinwheels, quilt squares): mid-scale florals and geometrics, where at least one full motif fits on each face. Flat panels (clipboards, lids, a back wall): this is where the big, painterly prints get to show off, because nothing cuts the motif in half. Before you cut, hold a paper window the size of the finished piece over the sheet and slide it around. You will see right away whether the pattern survives the trip. Glue, tape and cutting: keeping thin paper flat Patterned paper is easy to cut and fussy to stick. A few habits help: Use a dry adhesive for flat work. A glue stick or double-sided tape keeps lightweight paper from rippling. Save liquid glue for small joins, like the end of a bead or a rosette seam. Score every fold. Run a bone folder along a ruler before you fold, especially on boxes. The crease lands where you want it and the print does not crack. Change the blade often. A dull blade drags and tears printed paper at corners. Snap off a fresh segment for each project. Store the leftovers flat. Curled paper fights you on every project after this one. Our guide to craft paper storage covers boxes and drawers that keep both scrapbook pads and 11 x 16 sheets flat. If you have adhesive sheets left over after a wall or furniture project, they slot straight into this list too. Our craft wallpaper guide has more small projects built around them. Frequently asked questions What can I make with scrapbook paper? Scrapbook paper suits anything that folds, rolls or layers: origami masu boxes, accordion rosettes, pinwheels, rolled paper beads, paper quilt wall hangings and dollhouse wallpaper. Choose a print scale that fits the finished size of the piece, use a glue stick or tape for flat work, and score every fold so the creases stay crisp and the print does not crack. Can you use scrapbook paper as wallpaper? On a dollhouse, shadow box or miniature room, yes, and it is one of the best uses for small-scale prints. On a real wall it is impractical: 12 x 12 sheets have no adhesive and leave a grid of seams. For a full wall or a piece of furniture, peel-and-stick wallpaper sheets are made for the job and go up without paste. What is the best glue for scrapbook paper crafts? For flat surfaces, a glue stick or double-sided tape is the safest choice because neither soaks into thin paper and makes it ripple. Liquid craft glue works for small joins such as bead tips or rosette seams. For large flat panels, an adhesive-backed sheet avoids glue altogether and goes on in one smooth piece. Is scrapbook paper the same as cardstock? Not quite. Cardstock is a heavier, stiffer paper, often in solid colors, used for card bases and anything that needs to stand up. Patterned scrapbook paper is usually lighter and printed with designs on one or both sides. Many projects use both: cardstock for the structure and patterned paper for the decorative layer on top. What is the difference between scrapbook paper and peel-and-stick paper? Scrapbook paper has no adhesive, so it can be folded, rolled and glued wherever you choose. Peel-and-stick paper has a self-adhesive backing that sticks the moment it touches a surface, which makes it better for covering flat, rigid things like clipboards, box lids or furniture panels, and less suited to folding projects where the sticky side would catch.
Smiling child in a Santa hat in front of a soft green wall covered in Branches and Berries peel and stick sheets, next to a Christmas tree with gold baubles and white stars
Posted By Main Street

Christmas Paper DIY Decorations for Walls, Fireplaces and Bedrooms

A real tree needs a corner and a real fireplace needs a chimney. Plenty of homes have neither to spare, and a rented one usually comes with a lease clause about nails. Christmas paper DIY decorations get around all three: a pack of peel and stick sheets, a knife and an afternoon can put a tree, a hearth or a wrapped-present door on a plain painted wall, and every bit of it lifts off again in January. The ideas below stay on the walls, around the fireplace and in the bedroom. If you are dressing the table and sideboard, our guide to Christmas dining room decorations picks up where this one stops. Where Christmas paper DIY decorations work, and where they don't Paper is only as good as the wall under it. Main Street lists three best surfaces on its how-to-use page: smooth tile, sealed wood and painted drywall that is clean, flat and dry. The same page names four to avoid: ceilings, textured or popcorn drywall, brick or stone walls, and areas exposed to moisture such as bathrooms and showers. A brick chimney breast falls on the wrong side of that list, which matters later. Two more checks before you cut: Fresh paint. If you painted recently, Main Street asks you to wait at least four weeks before applying. A test patch. Press a small offcut somewhere out of sight, leave it a day, then peel it. If it comes away cleanly, carry on. The tool list is short: a measuring tape and pencil, a utility knife, a damp cloth and a smoothing tool. Add a level, because a leaning tree is the one detail every guest spots. Every wall sheet mentioned here is 11 x 16 inches, about 1.22 square feet, sold in 12-packs that cover roughly 14.6 square feet. DIY Christmas wall decor: a stepped paper tree A wall tree suits a studio, a dorm or a hallway too narrow for anything with branches, and built from whole sheets it needs little cutting. The layout Turn the sheets landscape, so each one is 16 inches wide and 11 inches tall, and stack them in rows that shrink by one sheet as they climb: Four rows (4, 3, 2, 1): 10 sheets, a base 64 inches wide and a tree 44 inches tall. Three rows (3, 2, 1): 6 sheets, 48 inches wide and 33 inches tall. A good size above a dresser or a bed. Center each row over the one below, which shifts it 8 inches in from each side. For a true triangle instead of steps, pencil a line from the top center of the highest sheet down to each end of the base row and trim along it with the knife once everything is on the wall. These counts are our own arithmetic, not a product spec, so measure first. For the print, Branches and Berries is the obvious pick: watercolor branches with tiny white berries on soft green. Either tree leaves sheets spare in a 12-pack for a trunk, or cut one from a wood-grain sheet such as Distressed Wood Grey. Decorating it Cut circles from Candy Stripe for baubles and press them onto the tree. Sheet on sheet is not on the official surface list, so stick one bauble first and check it the next day before you add the rest. A gold star cut from Glow Getter, the embossed foil craft panel at 10 x 15 inches, finishes the top. For ornaments the family can add to, cut shapes from Chalkboard Classic, a matte black writable panel measuring 11 x 15 inches that takes chalk and chalk markers, and let everyone write a name or a wish on one. A faux fireplace for a home without one The trick is a brick surround, a dark opening, and real furniture in front to carry the stockings. The brick surround Red Bricks is a realistic brick pattern in reds, terracotta and earthy tones. It is printed paper, so it goes on painted drywall like any other sheet. Working in portrait (11 inches wide, 16 tall): Draw a level line 32 inches above the baseboard. Lay two rows of four sheets below it, a field 44 inches wide, but leave out the two middle sheets of the bottom row. That gap, 22 inches wide and 16 tall, is your firebox. Add two more sheets centered above the top row for a chimney breast 22 inches wide. That uses eight sheets and leaves four in the pack for trimming and repairs. The firebox Two Chalkboard Classic panels placed side by side in portrait cover 22 by 15 inches, an inch short of the opening. Align them with its top edge and fill the bottom inch with a band cut from a spare brick sheet, which reads as a hearth lip. Draw the logs and flames in chalk marker. The mantel Never hang anything from the sheets themselves. Push a slim console table or a low bench against the bottom of the surround and let its top be the mantel. Weighted stocking holders sit on it, and so do a garland and a few candles. Make those battery candles, since the brand publishes no heat rating for its sheets. Decorating around a real fireplace A working fireplace changes the rules. Fire departments, repeating federal holiday safety guidance, tell households to keep a Christmas tree at least three feet from heat sources such as fireplaces. Paper deserves the same caution, and Main Street publishes no heat rating for its sheets. So skip the surround, the mantel shelf and the chimney breast entirely. Most surrounds are brick or stone anyway, which the how-to-use page already lists as a surface to avoid. That still leaves good places for DIY fireplace Christmas decor: The alcoves. Painted recesses beside the chimney breast take a tall panel of sheets and frame the fireplace without touching it. The wall facing it. Put the stepped tree opposite, so the two face each other. A purely decorative fireplace that is never lit is a different case. If the wall above it is painted drywall, treat it like any other wall. Wrap a bedroom door like a present This one costs about four sheets and gets the biggest reaction of anything here. Most interior doors are painted, which matches the painted, sealed and finished surfaces the product pages ask for. Keep it to doors inside the house, away from weather. Measure your door. Most interior doors are 80 inches tall, but check before you cut. Slice Candy Stripe sheets in half lengthwise to make ribbons 5.5 inches wide and 16 inches long. Run a vertical band down the center of the door: five ribbons end to end covers 80 inches. Match the diagonal stripes at each join so the seams disappear. Cross it with a horizontal band at about two-thirds height. A 32-inch door takes two ribbons. Cut a bow from the leftovers and press it over the crossing point. Stop the bands just short of the door edges and the latch, so nothing rubs against the frame each time the door closes. Covering the whole face of a 32 x 80 inch door instead takes about 15 sheets, so plan on two packs. Christmas bedroom decor that comes down in January A holiday headboard A painted wall behind the bed can take a seasonal headboard. Eight sheets of Branches and Berries laid landscape, four across and two down, make a panel 64 inches wide and 22 inches tall, enough to clear the width of a queen mattress. Round the top corners using a dinner plate as a template. For a permanent version, our bedroom accent wall ideas have more. A child's wall Children like decorations they can reach. Trees and Lights shows little trees topped with gold stars, colored string lights and festive phrases on a blush background, and a low band of it at their eye level becomes their own corner. Put one Chalkboard Classic panel in the middle of the band for a letter to the North Pole that can be rewritten every night. Leftover strips make bunting for a shelf or flat paper ornaments; our list of Christmas crafts for adults has plenty of ways to use the scraps. In January, peel each sheet back slowly at a low angle, close to the wall. Our guide on how to remove peel and stick wallpaper walks through the details. Frequently asked questions Can you put peel and stick wallpaper on a fireplace? Not on a working one. Fire-safety guidance asks for at least three feet between a Christmas tree and a fireplace, the same caution suits paper, and Main Street publishes no heat rating for its sheets. Most surrounds are brick or stone, which the brand lists as surfaces to avoid. Decorate the painted alcoves or a nearby wall instead, or build a faux fireplace on a wall elsewhere. How many sheets do I need for a paper Christmas tree on the wall? Using 11 x 16 inch sheets turned landscape, a three-row stepped tree takes 6 sheets and stands about 33 inches tall and 48 inches wide. A four-row tree takes 10 sheets and reaches about 44 by 64 inches. Either fits in one 12-pack, with sheets left over for a trunk or ornaments. Will paper Christmas decorations damage my walls? The sheets are sold as removable and repositionable, and the product pages describe them as perfect for renters. Results still depend on the wall. Use them on clean, smooth painted drywall, wait at least four weeks after painting, and run a small test patch first. When you take them down, peel slowly at a low angle. Can I stick paper decorations on a brick wall? Main Street lists brick and stone walls among the surfaces to avoid, because the adhesive needs a flat surface to grip. If you want a brick look, do it the other way around: put Red Bricks sheets on a smooth painted wall. They are printed paper, so they give you the brick without the uneven surface. What is the easiest DIY Christmas room decor for renters? A wrapped bedroom door. It takes about four sheets of Candy Stripe and a utility knife, and most interior doors are painted, which matches the painted, sealed and finished surfaces the product pages ask for. Keep the bands clear of the door edges and latch, and it comes off in January with the rest of the decorations.
Overhead view of a white wooden tray with rope handles, its base lined with dark crocodile-embossed paper, holding a round wooden board with a plate of chocolate chip cookies, a candy cane, a silver jingle bell and a gold ornament
Posted By Main Street

Dollar Tree DIY Christmas Decorations: 8 Paper Makeovers for Decor and Gifts

The plainest things in the seasonal aisle are the ones worth carrying home: the clear glass cylinder, the bare white tabletop tree, the frame with nothing in it. Plain is a blank surface, and a blank surface is all that Dollar Tree DIY Christmas decorations really need. Add a few sheets of patterned peel and stick paper and those bases stop looking like what they cost. Main Street makes peel and stick wallpaper sheets that are sold at Dollar Tree, so this is our own list: five decorations and three gifts, each built from a store-bought base and finished with paper. What to put in the cart Stock changes by store and by week, so treat this as a list of shapes instead of a list of products. You are looking for things that are plain, smooth and simple in outline: Glass cylinders, jars and candle holders with straight sides A small white or green tabletop tree Cone forms, or a sheet of poster board to roll your own Gift boxes with lids, in two or three sizes Small paper treat bags A flat-bottomed tray, a lidded jar and a photo frame for the gifts Battery tea lights Then the paper. Whatever prints are on the wallpaper peg that week will work, and the holiday designs live on our site. Candy Stripe is a red and white diagonal, Trees and Lights scatters little trees and strings of bulbs over a blush ground, and Branches and Berries is watercolor greenery on soft green. Each sheet is 11 x 16 inches, and online they come in 12-packs. New to the sheets themselves? Our guide to Dollar Tree peel and stick wallpaper covers how they behave. One test before you cut anything Main Street's list of best surfaces was written for rooms: smooth tile, sealed wood and painted drywall. The product pages ask for painted, sealed and finished surfaces. Glass, cardboard, tin and plastic are not named either way, and that describes most of what is in your cart. So run a two-minute test. Cut a strip from the edge of a sheet, press it onto the base, and leave it while you set up. If it is still flat when you come back, carry on. If the edges have lifted, wipe the base with a dry cloth and try once more, or pick a smoother base. Rough foam and glittered finishes tend not to give the adhesive enough contact. You will also need a utility knife, a metal ruler, a cutting mat, small scissors and something flat to smooth with. An old gift card does the job. Five Dollar Tree DIY Christmas decorations dressed in paper 1. Paper cone trees Wrap a piece of scrap paper around the cone, mark where it overlaps and where it meets the table, then cut along your marks. That scrap is now your template. Trace it on the back of a sheet, cut, peel and roll the paper around the cone, closing the seam at the back. A cone about 9 inches tall and 4 inches across the base fits on a single sheet if you place the tip of the template at a corner. Make three in different heights and prints and stand them together on a shelf. Rolling your own cones from poster board gives you a smoother surface than foam, and any height you like. 2. A white tabletop tree with a paper collar The classic Dollar Tree white Christmas tree DIY usually stops at ornaments. The weak spot is the base, which tends to be a plastic stand or a plain pot. Cover it with a collar. Measure around the pot with a piece of string and add an inch for the overlap. A pot up to about 15 inches around takes one strip cut along the long side of a sheet. For anything bigger, join two strips and turn the seam to the wall. Press the strip onto a band of poster board first if the pot is tapered or ribbed, then wrap the band around it. Candy Stripe against white branches does most of the decorating by itself. For the branches, the flat and folded ornaments in our Christmas crafts for adults guide are sized for a small tree. 3. Glass lanterns with cut-out windows Cut a band as tall as the straight part of a glass cylinder and long enough to wrap it with a half-inch overlap. Before you peel anything, cut small stars or simple tree shapes out of the band with the knife. Peel, line up one end and smooth the paper around the glass. Drop in a battery tea light and the windows glow. Battery lights only: Main Street does not publish a heat rating for its papers, and paper burns, so real flames stay out of anything wrapped in it. 4. A stack of pretend presents Three lidded gift boxes in descending sizes, each covered in a different print, make a decoration that sits under the small tree or on a console until January. Cover the lids and bases separately so the boxes still open, and you can store next year's ribbon inside. Choose boxes whose largest face is smaller than a sheet, so no side needs a seam. Corners are the only tricky part, and our guide to covering a cardboard box with contact paper walks through them. 5. A countdown of treat bags Twenty-four small paper bags, each with a number on the front, clipped along a length of twine: an Advent calendar for the cost of the bags and the treats. For the numbers, use Chalkboard Classic, a self-adhesive chalkboard panel that takes chalk and chalk markers. It measures 11 x 15 inches, so a grid of 2-inch squares gives you 35 from one panel, with spares for mistakes. Write the numbers with a chalk marker before you peel, then press a square onto each bag. If the bag paper is too rough to hold it, press the squares onto cardstock and tie them on as tags. Three DIY Christmas gifts from Dollar Tree bases The same paper turns an ordinary object into something that looks chosen. These three work for teachers, neighbors and the host of the party you forgot about. 6. A cookie tray Line the base of a flat-bottomed tray and hand it over with a plate of cookies on top. For this one we would use Very Crock N Roll, an embossed foil craft panel with a dark reptile texture. Its product page lists it as water-resistant and suggests trays and coasters. The paper wallpaper sheets are not sold as water-resistant, so the foil panel is the better pick for anything that sits under a cold glass of milk. The panel is 10 x 15 inches, so measure the tray first. A wider base needs two panels with the seam down the middle. Keep the food on a plate or a board, since the page says nothing about direct food contact. 7. A jar of something homemade Fill a lidded jar with cocoa mix, layered cookie ingredients or wrapped candy. Wrap a 2-inch band of a holiday print around the middle, then add a chalkboard label on the front with the name of what is inside. Everything stays on the outside of the glass, and the band is paper, so the jar gets wiped, not soaked, while it is on. 8. A framed photo with a patterned mat Take the backing board out of a photo frame, cover it edge to edge with a sheet, and mount a smaller photo in the center with photo corners or a loop of tape. The print becomes the mat. Branches and Berries is quiet enough to sit behind a family picture without competing with it, and since the paper lives behind glass, the frame works all year. What to do with it all in January The cone trees, boxes and collar pack flat or nest inside each other, so they can simply go into storage. For the pieces you want back to plain, such as the jars and lanterns, lift a corner of the paper and peel slowly. Do the same test here that you did at the start: try one before you assume the rest will behave the same way. Leftover sheets do not need to wait eleven months. Our Dollar Tree wallpaper ideas has nine year-round projects for them, starting with the drawer that annoys you most. Frequently asked questions What Christmas decorations can you make from Dollar Tree items? Plain bases are the best starting point: glass cylinders become lanterns, cone forms become tabletop trees, gift boxes become a stack of pretend presents, and treat bags become a countdown calendar. Patterned peel and stick paper supplies the color and print, so most DIY Dollar Tree Christmas crafts need only a knife, a ruler and battery lights. How do you decorate a Dollar Tree white Christmas tree? Start at the bottom. Hide the plastic stand or pot with a paper collar cut from a patterned sheet, then hang lightweight paper ornaments so the branches do not sag. A strong red and white print reads clearly against white branches. Keep to two prints at most, because a small tree gets busy quickly. What are good DIY Christmas gifts from Dollar Tree? Gifts built on a useful object tend to land best: a lined tray delivered with cookies, a jar of cocoa mix with a paper band and a handwritten label, or a photo frame with a patterned mat behind the picture. None of them is a long project, and the paper is what makes each one look considered. Does peel and stick paper stick to glass? Glass is smooth, which is what a pressure-sensitive adhesive wants, but it is not on Main Street's published list of best surfaces, so test first. Press an offcut onto the clean, dry glass and check it after a few minutes. Straight-sided jars and cylinders are far easier to wrap than curved or tapered ones. Can you put a real candle inside a paper-wrapped jar? No. Use battery tea lights or a short string of battery lights. Main Street does not publish a heat rating for its papers, and paper burns, so an open flame inside or beside a wrapped container is a fire risk. Battery lights give a similar glow through the cut-out windows.
White paper cutout of a deer with antlers set against a circle of grey woodgrain-patterned paper on a white background
Posted By Main Street

Christmas Crafts for Adults: Paper Projects for One Evening

An evening, a cutting mat and a few sheets of patterned paper: that is the whole shopping list for most of the ideas below. The usual run of Christmas crafts for adults asks for a hot glue gun, a can of spray adhesive and a table you can't use until Thursday. Peel and stick paper skips the glue entirely, since the adhesive is already on the back, so a project starts when you pick up the knife and ends when you put it down. Every idea here fits in a single sitting, stays indoors and dry, and works from a pack of sheets or a single craft panel. Why paper makes easy Christmas crafts for adults Most craft projects stall at the drying stage. With self-adhesive paper there isn't one, so instead of one ornament waiting for glue to set, you can finish a dozen. The format helps too. Main Street's Classic wallpaper sheets are 11 x 16 inches, about 1.22 square feet each, and come in 12-packs. A sheet yields eight card fronts, six garland pennants or a whole tree's worth of small ornaments. The craft paper line runs a little smaller, so check the product page before you plan a cut: Chalkboard Classic measures 11 x 15 inches and Glow Getter 10 x 15. Gather these before you start: A self-healing cutting mat, a metal ruler and a sharp utility or craft knife Small scissors for curves A pencil, and a few templates cut from cereal-box card Plain white cardstock, for anything that needs to stand up or hang Thin ribbon, baker's twine or embroidery thread Three holiday prints do most of the work in this guide. Trees and Lights has little trees topped with gold stars, strings of colored bulbs and "Merry Christmas" lettering on a blush ground. Candy Stripe is a red and white diagonal stripe. Branches and Berries is the quiet one, with watercolor greenery and small white berries on soft green. Paper ornaments: flat, folded and three-dimensional Ornaments are the classic Christmas paper craft for adults. Flat ornaments with some body A single sheet is too floppy to hang well on its own. Press it onto plain cardstock first, smoothing from the center out, then trace your template on the back and cut. The white reverse is a good place to write a name or a year. For pattern on both faces, cover the white side with a second sheet before cutting, so both layers trim at once. Punch a hole near the top and thread a loop of ribbon through. Stars, circles, bells and simple tree outlines all cut cleanly; shapes with needle-thin points are another matter, so keep points to about a quarter inch wide. Folded 3D trees This is the one people pick up and turn over. Cut three identical tree shapes from a sheet, liner still on. Fold each tree in half lengthwise, print facing out. Then peel the liner from the right half of the first tree and the left half of the second, and press those two adhesive halves together so the folds line up in the middle. Repeat to join the second tree to the third, and the third back to the first, laying a loop of thread along the center fold before you close the last pair. Open the fins and you have a tree that looks right from every side. Gold stars For shine, Glow Getter is a solid metallic gold embossed foil panel. Cut stars from it with a ruler and knife, back them with cardstock, and hang them among the paper ornaments so the tree doesn't read as one print. Christmas cards and envelope liners A single panel of patterned paper turns a blank card into something that looks finished. Start with blank folded cards in the common 4.25 x 5.5 inch size. Cut panels at 4 x 5.25 inches, which leaves a slim white border all round. Lay them out with the long side across the sheet: two panels span 10.5 inches of the 11-inch width, and four rows fill the 16-inch length exactly, so one sheet gives you eight card fronts with almost no waste. A 12-pack is enough for 96 cards, more than most people send. To keep the panel straight, peel back only the top inch of liner, set that edge against a ruler, then pull the rest away as you smooth down. Envelope liners use the offcuts. Trace the envelope flap onto the back of a sheet, cut it about an eighth of an inch smaller on every side, slide it in and press it to the inside of the flap. Try one envelope before you line the whole stack (see the note on surfaces below). A Candy Stripe liner inside a plain white envelope makes the card feel like a gift before it is even opened. Garlands you can finish in one sitting A pennant garland with no glue at all Cut blanks 3 inches wide and 8 inches long; six fit on one sheet. Peel the liner off a blank, lay your twine across the middle, and fold the paper over it so the two sticky halves meet. The adhesive grips the twine and the result is a 3 x 4 inch flag with the print on both sides. Trim the bottom into a point or a swallowtail and slide it along to make room for the next one. Two sheets make a twelve-flag garland. A paper chain for grown-ups Cut strips 1 inch wide across the 11-inch side; sixteen come out of one sheet. Peel the last inch of liner from each strip, loop it through the previous link and press the end down. Alternate two prints, say Candy Stripe and Branches and Berries, and the chain stops looking like a school project. Keep any paper garland well away from candles, fireplaces and heaters. Main Street doesn't publish a heat rating for its papers, and paper burns, so give every garland plenty of clear space from any flame. Gift tags, bands and finishing touches Gift wrap tends to happen at midnight, so small touches that take two minutes each are worth having ready. Writable tags. Chalkboard Classic is a self-adhesive chalkboard surface that works with chalk and chalk markers. Press a piece onto cardstock, cut tag shapes, punch a hole, and write names with a chalk marker. Belly bands. Wrap a box in plain brown or white paper, then run a 2-inch strip of a holiday print around the middle and press the overlap closed on the underside. It looks styled and uses only a strip. Box lids. For a sturdy gift box, cover just the lid; our guide to covering a cardboard box shows the corners. A note on surfaces: Main Street's list of best surfaces is written for walls and furniture (smooth tile, sealed wood, painted drywall), and the product pages ask for painted, sealed or finished surfaces. Cardstock, envelopes and gift boxes aren't named either way, so press a test scrap onto the card you plan to use and check it holds before you cut a whole batch. Hosting a Christmas craft night for a group of adults Paper suits a group because nobody waits on glue and the table stays clean. A few things help: Pre-cut the templates. Make three or four card templates per shape before guests arrive. One knife station. Set up a single cutting mat and ruler at one end of the table for straight cuts, and give everyone small scissors for the rest. Plan the paper. One 12-pack comfortably supplies four to six people making ornaments and tags, with a craft panel or two of gold for accents. Keep a bin for liners. Peeled backing piles up faster than you expect. For Christmas crafts for older adults, or anyone who finds fine cutting tiring, cut the shapes in advance and make the session about assembly: pressing panels onto cards, folding pennants over twine, threading ribbon. Larger shapes are easier to handle than tiny ones. Offcuts become next year's tags, and our post on craft wallpaper has six more small projects for the scraps. If you are also setting the holiday table, our Christmas dining room ideas use the same prints for a backdrop, a runner and place cards. Frequently asked questions What are some easy Christmas crafts for adults? Card fronts, flat ornaments, pennant garlands and gift tags are the easiest, because each one is a straight cut and a single press. Self-adhesive paper removes the glue and drying steps, so a beginner can finish several pieces in an evening. Start with card panels: the cuts are rectangles and the result looks polished straight away. What Christmas crafts can you make with paper? Ornaments (flat, folded or 3D), greeting cards, envelope liners, pennant garlands, paper chains, gift tags, belly bands for wrapped presents and covered box lids. Patterned peel and stick sheets are especially useful because the print does the decorating and the adhesive does the assembly, so you only need a knife, a ruler and some cardstock. Do you need glue for peel and stick paper crafts? No. The adhesive is already on the back of the sheet under a paper liner. You do need a few tools: a sharp knife, a ruler, a cutting mat, small scissors and a pencil. For anything that hangs or stands, back the sheet with plain cardstock first so the finished piece holds its shape. What is a good Christmas craft for a group of adults? Ornaments and pennant garlands work best for groups, since everyone can trace from shared templates and nobody waits on glue. One 12-pack of sheets supplies four to six people comfortably. Pre-cut templates, a single knife station and a bin for peeled liners keep the evening relaxed and the table clean. Can you make Christmas crafts to sell? Repeatable pieces are the practical choice for a market table: card sets, ornament sets and gift tags that you can make in batches from templates. Main Street doesn't publish a policy on selling finished items made with its printed designs, so contact the store before you price anything that features its patterns. Price for your time as well as the paper, since batch-cutting from templates is what makes it worthwhile.
Two open light oak dresser drawers lined with green and cream floral paper, holding a tray with a hair clip and scrunchie, folded knit towels, a notebook and a woven basket
Posted By Main Street

How to Clean Shelf Liner and Contact Paper, Type by Type

Shelf liner is supposed to take the hit so the cabinet doesn't, which means sooner or later the liner is the dirty thing. A ring of olive oil under the bottle, flour in the corners, a sticky patch where the honey jar sat. Knowing how to clean shelf liner comes down to one question you answer before you reach for a sponge: what is this liner actually made of? Get that right and cleaning takes ten minutes. Get it wrong and you can soak a paper sheet or loosen an adhesive edge that a quick dusting would have handled. How to clean shelf liner starts with what it is made of Most liners in a home kitchen fall into one of three families, and each one wants different treatment. Non-adhesive grip liner. The cushioned, open-weave or ribbed roll that lies loose on the shelf. It is meant to be lifted out, so it is also the one you can wash. Adhesive contact paper with a plastic film face. The classic shelf-aisle roll. Most of it is vinyl film with a sticky back, and it stays put once applied, so you clean it where it is. Self-adhesive paper sheets. Printed paper with a peel-off backing, like the Classic Sheets Main Street sells. These also stay where you put them, but the face is paper, which changes the rules. Not sure what you bought? Lift a front corner. A loose liner comes straight up; an adhesive one resists. A glossy, slightly plastic face points to film, while a matte print with a paper edge points to paper. Can you wash shelf liners? The lift-out kind, yes Grip liner is the only type built to come out of the cabinet and go into water. The care instructions on these products are not all the same, though. Some makers say to wipe with mild soap and water, some say it can be submerged in soapy water, and at least one grip liner is labeled machine washable in cold water with instructions to lay it flat to dry. The label on your roll is the one that counts. When there is no label to go by, a gentle hand wash is the safe default: Empty the shelf and carry the liner outside or over the sink before you shake it, so the crumbs don't land back in the cabinet. Soak it briefly in a sink of warm water with a few drops of dish soap. Work the grid with a soft brush where food has dried into the texture. An old toothbrush reaches into the ribs without tearing the foam. Rinse well. Soap left in the weave attracts dust and can feel tacky later. Dry it flat and completely over a rack or a clean towel. Putting a damp liner back on a wooden shelf traps moisture against the wood, which is the opposite of what a liner is for. As for the dishwasher, we have not seen a grip-liner care label that recommends it. Unless yours does, keep it in the sink. How to clean contact paper without lifting it Adhesive film contact paper is cleaned in place. One shelf-liner maker's own instruction sheet keeps it simple: wipe with a damp cloth and mild soap if necessary. That is most of the job. The rest is about protecting the two places where adhesive liner fails first, the cut edges and the seams. Wring the cloth hard. You want damp, not wet. Water that runs to an edge can wick underneath and start lifting it. Wipe along the seams, not across them. Dragging a cloth across a seam catches the top layer and peels it back a little more each time. Skip scouring pads and powders. They scratch the film and can wear through a printed pattern. Dry it with a second cloth straight after, especially along the front edge of the shelf. For a greasy patch near the stove, a drop more dish soap and a little patience beats a stronger chemical. When contact paper itself feels sticky Old contact paper sometimes turns tacky on the face or oozes adhesive at the edges. Cleaning won't fix that, because the problem is the liner aging, not dirt on it. That is the point to replace it rather than scrub it. Our guide on how to remove contact paper walks through taking off old, stuck-on layers and dealing with the residue they leave behind. Cleaning paper shelf liner: dust it, don't scrub it Self-adhesive paper sheets look the most like decor, and they need the lightest touch. Main Street's Classic Sheets are published as peel and stick paper wallpaper, and the brand's own how-to-use page lists areas exposed to moisture among the places to avoid. Main Street doesn't publish a cleaning routine for the sheets, so the sensible approach is to keep water out of it as far as you can. Dry first. A soft brush, a dry microfiber cloth or the brush attachment on a vacuum handles crumbs, flour and dust on a dry pantry shelf. For a spot, go barely damp. If something sticky has landed, use a cloth wrung out until it is almost dry, dab rather than rub, and dry the area right away. Try it first on an offcut or a corner hidden behind a canister. Leave the chemicals out. The 30% isopropyl alcohol and 70% water mix on the how-to-use page is a prep step for the bare surface before you apply a sheet. It isn't offered as a cleaner for the printed face, so don't improvise with it, or with anything stronger. Replace one sheet instead of rescuing it The upside of an 11 x 16 inch sheet is that a stain is a one-sheet problem. Peel the marked sheet, check the shelf underneath is clean and dry, and press a fresh one into the same spot. The product pages note that colors can vary slightly between print runs and suggest buying everything for a project at once, so tuck two or three spare sheets from your original pack into a drawer for exactly this. Clean the shelf, too, while it is empty Any time a liner comes up, check the shelf under it for crumbs, dust and the dark marks of moisture that sat too long. If you are re-lining with an adhesive sheet, Main Street's prep step is the one to follow: wipe the surface with a damp cloth to lift dust, clean it with that 30/70 alcohol and water mix, and let it dry completely before the new sheet goes down. Adhesive and moisture don't get along, so a shelf that is still damp will fight you. A musty smell from a drawer or cupboard usually points to damp rather than to the liner. Empty it, wipe it, leave it open for a few hours to dry, and find the source: a leaky bottle, a damp sponge, a pipe. Crumbs matter too, since food draws pests far more than any liner does, as our piece on whether shelf liner attracts bugs explains. Choose a liner that fits how often you'll clean The easiest liner to clean is the one that matches the shelf. If you are shopping for washable shelf liner or wipeable drawer liners, the real decision is which zone each shelf sits in. Spill zones (under the sink, the oil and vinegar shelf, the fridge): a lift-out mat or a tray you can carry to the sink. Our roundup of shelf liner alternatives sorts these by job. Everyday dry shelves (cereal, tins, glasses): adhesive liner works, cleaned in place with a damp, well-wrung cloth. Display and decorative spots (open shelving, a dresser drawer, a linen closet): paper sheets earn their place here, because they get dusted rather than washed. Pattern helps between cleanings. A busy, mid-tone print disguises a few crumbs far better than a plain dark or plain white sheet, which shows every speck. The Distressed Wood Grey sheets read like a weathered wood shelf, and the Block Print Floral sheets give a small allover floral that forgives a dusty week. Herringbone and Gold Woven are the more graphic options, and the Free Spirit page lists shelves among its suitable surfaces. Still weighing materials? How to choose shelf liner breaks it into five questions. Frequently asked questions How do you clean shelf liner without taking it out? Vacuum or brush away loose crumbs first, then wipe with a cloth dampened in warm water and a little dish soap, wrung out until it barely drips. Work along the seams rather than across them and dry the surface with a second cloth. On paper sheets, skip the soap and water and stick to dry dusting or a barely damp dab. Can you put shelf liner in the washing machine? Only if the label says so. Some grip liners are sold as machine washable in cold water and dried flat, while others call for a hand wash or a wipe with mild soap. Adhesive contact paper and paper sheets never go in a machine, because they are stuck to the shelf and are cleaned where they are. How often should you clean shelf liner? Give pantry and dish shelves a quick dust or wipe whenever you restock or clear out expired food, and deal with any spill as soon as you see it. A fuller clean once or twice a year, when everything comes off the shelf, is enough for most homes. Shelves near the stove collect grease faster and may need it more often. Can you clean contact paper with vinegar or disinfecting wipes? A maker's instruction sheet for film contact paper calls for a damp cloth and mild soap, which handles most messes. If you prefer vinegar or a disinfecting wipe, test it on a hidden corner first and check for dulling or a tacky surface. On paper sheets, avoid both, since the face is paper and Main Street publishes no cleaning chemicals for it. What is the most washable shelf liner? A loose, non-adhesive grip liner is the easiest to wash, because you can lift it out and rinse it in the sink. It is the better choice for spill-prone spots such as under the sink. Adhesive liners stay put and are wiped in place, and paper sheets suit dry, decorative shelves that only need dusting.
Family taking a selfie at a dining table set with food and glasses, in front of a wall covered in red and white candy stripe peel and stick wallpaper sheets
Posted By Main Street

Christmas Dining Room Decorations: Paper Ideas for the Wall, Table and Sideboard

The dining room works harder in the last six weeks of the year than in the other forty-six. It hosts Thanksgiving, a cookie swap, one dinner that runs two hours over, and then Christmas itself. Most Christmas dining room decorations are bought for that short stretch and boxed up for the rest of the year, which is a lot of closet space for a month and a half of use. Paper is the lighter option. The ideas below use peel and stick sheets and craft paper to dress the wall, the table and the sideboard, and nearly all of it lies flat in a drawer once January arrives. Plan Christmas dining room decorations around three zones Guests at a table look at three things: the wall across from them, the table in front of them and the sideboard where the food waits. Give each zone one idea and stop. One decorated wall, a dressed table and a tidy buffet read as finished; garlands on every surface read as storage. Pick the pattern first, because it sets the palette for everything else. Three of Main Street's wallpaper sheet designs are drawn for this time of year: Candy Stripe: bold diagonal stripes in red and white. Loud, cheerful and very good in photos. Trees and Lights: little Christmas trees, string lights and festive phrases on a blush background. The one children choose. Branches and Berries: watercolor branches with small white berries on soft green. It is quiet enough to go up before Thanksgiving and stay through New Year's Day. All three come as 12-packs of 11 x 16 inch sheets. Each sheet covers about 1.22 square feet, so a pack covers roughly 14.6 square feet. Put a holiday backdrop on the wall behind the table The product pages for Candy Stripe and Trees and Lights name holiday backdrops as one of the things the sheets are for, and their photos show exactly that: a patterned wall with a family crowded in front of it. In a dining room, the natural spot is behind the head of the table or above the sideboard, where everybody ends up posing anyway. You do not need the whole wall. A clean rectangle does the job, and the sheet size makes the math easy: One pack: 4 sheets across and 3 sheets down gives a panel 44 inches wide and 48 inches tall. That is 12 sheets, with none left over. Two packs: 5 across and 3 down gives 55 inches by 48 inches, which suits a sideboard around five feet wide. It uses 15 sheets and leaves 9 for the table. The pages list the application surface as painted, sealed and finished surfaces, and Main Street's how-to-use guide names painted drywall that is clean, flat and dry among the best places to apply. The same guide says to skip textured drywall and brick or stone. If the room was painted recently, Main Street's tip is to wait at least four weeks before applying anything. The method is the one in that guide. Wipe the wall with a damp cloth (the guide suggests a mix of 30% isopropyl alcohol and 70% water) and let it dry. Draw a light pencil line with a level, since baseboards are rarely straight. Peel back the first few inches of backing, line the sheet up, press, and smooth as you pull the rest of the backing away. A utility knife trims the edges. The full tool list is a measuring tape, a pencil, the knife and a smoothing tool. Buy every sheet for the panel in one order. The product pages note that slight color variations can occur in printing, and a red stripe that shifts halfway across a wall is the sort of thing an aunt will point out. For paper that stays up all year, see our guide to wallpaper for a dining room. This panel is meant to be temporary. Dress the table with sheets you never stick down On the table, leave the backing on. A sheet with its liner still attached is simply a piece of heavy printed paper, which is all a runner or a placemat needs to be. Nothing touches your table's finish, and nothing needs peeling off later. A runner. Lay sheets end to end down the middle of the table with the long sides running lengthwise. Five sheets make a strip 11 inches wide and 80 inches long. On a typical six-seat table of about 72 inches, trim the last sheet to fit. A small piece of tape under each joint, on the liner side, keeps the strip from drifting. Placemats. One sheet per seat, set landscape. At 11 x 16 inches a sheet is a little smaller than a typical placemat, which leaves room for glasses beside it. Two limits apply. First, these wallpaper sheets are paper, and their product pages make no water-resistance claim, so treat them as dry decor. They sit happily under a centerpiece or a place setting. The gravy boat and the ice bucket belong on a tray. If a sheet does catch a spill, swap it for a fresh one; there are twelve in the pack. Second, Main Street does not publish a heat rating for any of its papers, so anything hot from the oven goes on a trivet. Line a tray and make coasters that can take a damp glass For the pieces that will meet condensation, switch to a different line. Very Crock N Roll is a 10 x 15 inch embossed foil craft sheet, and its product page describes the surface as water-resistant and suited to "functional creations like coasters, trays, and centerpieces." Natural Reflection, an embossed paper at 17.25 x 10 inches, carries a similar description. A serving tray is the quickest project. Measure the inside of the base, cut the sheet to size with a knife and a ruler, peel and press from one edge to the other. The page says the foil is best applied to smooth, finished surfaces, so a painted or sealed tray is the right candidate and raw wood is not. For coasters, cut squares or circles to fit plain coasters with a smooth, finished face. Keep expectations sensible. Water-resistant means a damp glass or a wiped-up drip, not a soak in the sink. The brand publishes nothing about direct food contact either, so cookies go on a plate that sits on the tray. Use chalkboard paper for the menu, the buffet labels and the place cards Chalkboard Classic is an 11 x 15 inch writable sheet that works with chalk and chalk markers. The menu. Trim an inch off the length and the sheet drops into an 11 x 14 frame with the glass taken out. Leave the backing on, write the menu, and lean the frame on the sideboard. Buffet labels. Cut strips, press them onto folded cards and write the dish names. Guests with allergies will appreciate it. Place cards. A strip about 2 x 3.5 inches on a folded card, one name each. Wipe and rewrite when the guest list changes. For the children's table, Dry Erase Classic is the same size and takes dry erase markers. Set one at each seat with the backing on and the youngest guests have something to do between courses. Our chalkboard wallpaper guide has more on writing and erasing. Turn the offcuts into small extras Trimming a panel and a runner leaves strips worth keeping. Centerpiece risers. Wrap two or three small boxes in the same pattern as the wall and stack them under a bowl of ornaments or a plant. Our guide to covering a cardboard box shows the corner folds. Chair tags. Press a piece onto plain card, cut out a tag shape, punch a hole and tie it to each chair with ribbon. One rule covers the whole table: paper and flame stay apart. Standard fire-safety advice is to keep candles at least a foot from anything that can burn, so use LED candles in a centerpiece that sits on or near paper. Take it all down in January The table pieces are easy: stack the runner sheets, placemats and menu sheet flat in a folder or a shallow drawer for next year. The wall takes a few minutes more. Start at a top corner and peel slowly, keeping the sheet close to the wall instead of pulling straight out. The product pages describe the sheets as removable and repositionable, but how any adhesive paper comes away also depends on the paint underneath. If your paint is old, flat or of unknown age, test one corner before you put up the full panel. Our step-by-step guide on how to remove peel and stick wallpaper covers stubborn spots. Whether a sheet that spent six weeks on a wall will go up cleanly a second time is not something the product pages promise. Plan on a fresh pack for next year's backdrop and keep this year's sheets for crafts. Frequently asked questions How can I decorate my dining room for Christmas on a budget? Decorate three zones and leave everything else alone: the wall your guests face, the table and the sideboard. One 12-pack of patterned sheets makes a 44 x 48 inch backdrop panel, a second pack supplies a runner and placemats, and a single chalkboard sheet handles the menu and place cards. Most of it stores flat afterward. Can you use peel and stick wallpaper as a Christmas backdrop? Yes. Main Street's Candy Stripe and Trees and Lights product pages list holiday backdrops among their intended uses. Apply the sheets to a clean, painted wall in a simple grid behind the table or above the sideboard. Twelve 11 x 16 inch sheets make a panel 44 inches wide and 48 inches tall, enough to fill the frame of a family photo. Will peel and stick wallpaper come off the wall after the holidays? The sheets are described on their product pages as removable and repositionable. Peel slowly from a top corner and keep the sheet close to the wall. Results also depend on your paint, so test a single corner first if the paint is old, flat or newly applied. Main Street advises waiting at least four weeks after painting before applying. Can I put wallpaper sheets directly on my dining table? For a seasonal runner or placemats, you do not need to. Leave the backing on and lay the sheets flat, so nothing sticks to the table finish. Keep them away from spills and hot dishes, because these paper sheets are not sold as water-resistant and Main Street does not publish a heat rating. Use trivets and trays. Is it safe to use paper decorations near candles? Keep them apart. Common fire-safety guidance is to place candles at least a foot from anything that can burn, and a paper runner, a wrapped box and a chair tag all count. Use LED candles in a centerpiece that sits on or near paper, and save real flames for a spot with clear space around them.